VLE 2130 / 2130 F
Content
-
Information
- VLE 2130 – with chain drive
- VLE 2130 F – with chain drive and self-supporting frame
- Space-saving
- Low-cost introductory model
- Lifting time only 45 seconds
- Minimal wear thanks to special bronze loadbearing nut
- Self-lubricating lifting spindle for less maintenance
- Comfortable working position under the vehicle thanks to a lifting height of 2 000 mm
- Also suitable for lowered sports cars: Low pad height of 85 mm
- Flexible lifting spindle cover with no gap stops oil escaping and keeps lift clean
- Low-level reinforcement of lifting arms and rubber door stop avoid damage on opening vehicle door
- Pushbuttons instead of rotary knobs for convenient operation
-
Technical data
Technical data: VLE 2130 / 2130 F Loadbearing capacity 3t Drive motor 1x3 kW Motor overload protection ✓ Self-lubricating lifting spindle ✓ Operating unit Pushbuttons Lifting arms 3-piece at front / 2-piece at rear Loadbearing nut material Special bronze Lifting carriage guide 6 rollers Height not including cable gantry 2565 mm / 2615 mm Exterior width 3160 mm / 3000 mm Drive-through width 2230 mm Inner post spacing 2630 mm / 2610 mm Length of lifting arms at front 430 / 880 mm Length of lifting arms at rear 830 / 1330 mm Pad height 85 mm / 100 mm Lifting saddle adjustment 30 mm Lifting saddle diameter 130 mm Max. lifting height 2005 mm Lifting time 45 sec. Minimum concrete thickness 140 mm (F only) grade C20 / 25 Power supply 400 V / 50Hz 3ph / 16 A / T+N CE certification ✓ Net weight 600 / 680 kg -
Accessories
- Set of spacer sleeves 35 mm (all lifts) (1 692 872 142)
- Set of spacer sleeves 90 mm (all lifts) (1 692 872 143)
- Set of spacer sleeves 180 mm (all lifts) (1 692 872 144)
- Set of spacer sleeve holders (1 692 872 145)
- Mount 100 mm, turntable (all lifts except VLE 2130E) (1 692 872 146)
- Auxiliary mount set for off-road vehicles (1 692 872 147)
- Storage tray set (4x) (1 692 872 148)
- Manual release mechanism (all lifts except VLE2130) (1 692 872 149)
- Ceiling cut-out (1 692 872 152)
- Lashing straps for assembly removal (1 692 872 154)
- Secondary side operating unit (1 692 872 155)
- Frame (for VLE 2130) (1 692 822 069)
- Fastening materials M12 (3T except VLE 2130 and VLE 2130E)(1 692 872 157)
- Fastening materials (VLE 2130) (1 692 872 159)
- Spindle oil (1 litre) (1 692 871 003)
